phone  +31(0)76 20 71 400     email   info@vltest.com

OVERRUN BRAKE SIMULATORS

for caravans and towtrailers

The overrun brake simulator operates the brake mechanism on the coupling of the trailer or caravan. It also holds the caravan/trailer on the rollers of the brake tester. The mechanism in the overrun brake simulator, which is activated by hand, applies force through the coupling device on the overrun brake. This force is measured with a strain gauge and is displayed on the readout cabinet of the roller brake tester.

VLTCAR2106

VLTCAR2106

Overrun brake simulator that is locked to a rail in the floor. Drive the trailer onto the rollers and connect it to the overrun brake simulator. Apply brake force by turning the hand wheel.
Works with any VLT brake tester that has the overrun brake testing option.


VLTCAR2810

VLTCAR2810

Mobile overun brake simulator. Ideal for testing large numbers of caravans/trailers up to 3500 kg axle weight. Collect the trailer on the parking lot and drive it to the brake tester. After the test, drive it back to the parking lot and collect another one.
No locking rails needed. Works with any VLT brake tester that has the overrun brake testing option.


VLTCAR2106

Complete set example:
VLT4233CAR-G6 Also available with axle lift (VLT4233LIFT/CAR-G6). Lifting capacity 100 mm, 4500 kg. Ideal for tandem axle trailers and caravans.
Locking rail available in 4, 5, 6, and 8 mtr length.

VLTCAR2810

GALLERY

overrun brake simulator overrun brake simulator overrun brake simulator overrun brake simulator
Roller brake tester VLT4233-G6